Home » Consequences Of Over-Lubricat » The Consequences Of Over-Lubricating Your Bearings
  • The Consequences Of Over-Lubricating Your Bearings

    You know what they say: everything’s better in moderation—including lubrication for your bearings. While you might think there’s no such thing as over-lubricating, using too much grease can lead to serious problems with your machines, including grease churn, overheating, damage to the electric motor, and seal damage.

    Thankfully, over-lubrication is one thing that’s easy to avoid, as long as you know what to do and take the time to do things right.

    The main causes of over-lubrication

    Before I discuss what happens if you over-lubricate your bearings, it’s important that you understand the main causes of over-lubrication so you can avoid them in the future.

    In order to prevent over-lubrication, you have to be extra cautious and follow the proper replacement schedule and techniques when re-greasing your bearings. Most of these greasing mistakes are easily prevented with the proper training and knowledge, but when we find cases of over-lubrication, these tend to be the most common causes:

    • Workers are inexperienced or poorly trained on proper greasing techniques
    • Maintenance manager assigns the task to a new hire or mechanic with little to no experience
    • The re-greaser or lube technician doesn’t appreciate the weight and importance of doing the job correctly or gaining familiarity, leading to cut corners and poor results
    • Using the wrong type of grease
    • These mistakes are easily avoidable and usually the result of mental errors or lack of knowledge. As you’re about to find out, it’s crucial that you correct whatever the issue may be asap.

    What happens when you over-lubricate your bearings

    Most people understand why a piece of equipment breaks down from being under-lubricated, but over-lubrication is a little harder to grasp. That being said, it’s certainly an issue that needs to be taken seriously, and is one that happens a lot more often than you realize. To show you why it’s crucial that you follow the proper greasing techniques, here’s an expanded explanation of what happens when you over-lubricate your bearings:

    1. Churned grease

    Over-lubricating your bearings will cause the rollers or balls to slide along the raceways, rather than turning. As they push along, they also push the grease out of the way, resulting in a low to no lubrication scenario. This grease churn and accelerated rate of oil bleed will cause your component temperatures to rise, which in turn will cause the grease to harden and hinder lubrication even more—causing oxidation and resulting in bearing failure.

    2. Motor failure

    In instances where bearings are in an electric motor, over-lubricating those bearings can cause serious damage. If the excess grease reaches the motor windings, the windings will get insulated with grease, causing inefficient performance, overheating, and bearing failure.

    3. Seal damage

    In addition to damaging your bearings, over-lubrication can also have a significant impact on your equipment’s seals. Excess grease has a tendency to find its way between lip seals, causing them to rupture and allowing contaminants like water and dirt to leak into the bearing housing. This can force you to completely flush your system.

    Prevention

    Now that you know the consequences of over-lubrication, it’s your responsibility to ensure it doesn’t happen in your machines. When it comes to preventing over-lubrication, it is key to have a proper training system and lubrication management program (lmp) in place that keeps everyone in line. Start by identifying the best grease to use with your equipment, then train your workers on all the proper re-greasing techniques and processes.

    You also need to determine the proper re-greasing frequency and grease amount — you can use vibration or sound analysis to determine the ideal grease level. There are also vendors such as trico that have a grease caddy with a sensor which goes on a specialized grease gun that allows you to fill the bearing, while it’s running, to the optimal grease level.

    While this might take some time and effort to get set up, you’ll end up saving a lot of money and machine downtime by improving your plant’s performance and efficiency.

One Responseso far.

Leave a Reply to John Miller Cancel reply

Your email address will not be published. Required fields are marked *